Clarke Tools
Clarke Tools
 





Power Drills & Rotary Hammers



Clarke Tools >  Clarke Power Tools >  Power Drills & Rotary Hammers


Clarke CDS3 Drill Stand With Vice  (Ref: 6500224)

Clarke CDS3 Drill Stand With Vice

The CDS3 from Clarke is a practical and easy to use drill stand with a vice, which allows electric drills to be securely held for vertical drilling. It is suitable for use with hand held electric drills with collar diameters of 43mm or 38mm with supplied reducing bush.

Note: Drill is not included

For use with hand held electric drills with collar diameters of 43mm or 38mm with supplied reducing bush
500mm Column height
Includes a depth adjustment scale and stop for drilling depth up to 60mm.
Cast iron base with fixing points suitable for attaching the included vice
Dimensions: 352x160x498mm


22.89 27.47


Quantity:  


People who bought this item also bought:
1. Clarke CHD850B 850W Hammer Drill (230V) (Ref: 6479502)


Clarke DS1 Drill Stand  (Ref: 6500220)

Clarke DS1 Drill Stand

An exceptionally useful workshop accessory, the CDS 1 drill stand converts virtually any electric drill into a pillar drill. Ideal for accurate drilling at 90 degrees, it will accept any drill with a 38mm collar or Euro standard 43 mm collar.

Maximum drilling depth 70mm.
Column to drill centre (width) 140mm.
Column height 550mm.
Lockable depth stop with scale.
Sturdy cast iron base (160mm x 160mm) with holes for bench mounting.
Overall dimensions (LWH) - 410mm x 170mm x 540mm.
Drill not supplied


29.80 35.76


Quantity:  



RAD 2 Right Angle Drill Attachment  (Ref: 6500234)

RAD 2 Right Angle Drill Attachment

Right angled attachment adds versatility to your conventional drill to enable access to tight corners or awkward angles.

Ideal for plumbers and electricians
1.5 10mm chuck capacity
Handle can be fixed to either side for left or right hand operation
Includes handle and chuck key
Dimensions (LDH): 125 x 115 x 95mm


9.70 11.64


Quantity:  



RAD 1 Right-Angle Drill Attachment  (Ref: 6500232)

RAD 1 Right-Angle Drill Attachment

Right-angled attachment to allow your drill to access those difficult-to-reach areas.

Adds versatility to most types of drill
Heavy-duty tool ideal for plumbers and electricians
10mm chuck capacity
Kit includes chuck key and spanner
Please Note - if your drill has selectable hammer action, make sure it's off if you use it with the RAD1
Dimensions (LWH) 154x33x107mm


19.80 23.76


Quantity:  



Clarke CHD850B 850W Hammer Drill (230V)  (Ref: 6479502)

Clarke CHD850B 850W Hammer Drill (230V)

This CHD850B Hammer Drill is an excellent value high performance hammer drill. Its 850W motor makes it ideal for fast drilling of masonry, wood and steel. Features an anti-slip grip for safe comfortable use.
850W, 230V motor
Lock on switch for continuous operation
Variable speed with reverse action: 0-2800rpm
13mm key tightening chuck
Maximum drilling capacities (dia.): Wood 32mm, Steel 12mm, Masonry 16mm
Includes chuck key and side handle with depth stop gauge
Weight 2.2kg


24.00 28.80


Quantity:  


People who bought this item also bought:
1. Clarke CDS3 Drill Stand With Vice (Ref: 6500224)


Clarke CRD1100 1100W SDS+ Hammer Drill (230V)  (Ref: 6479610)

Clarke  CRD1100 1100W SDS+ Hammer Drill (230V)

This powerful drill is ideal for tough jobs like drilling concrete lintels etc. The 1100W motor makes drilling and chiselling of brick and block work a simple task.

No load speed: 950rpm
Impact rate: 4200 blows/min
Impact energy 5J
Max drilling capacities (dia.) concrete 28mm, steel 13mm, wood 40mm
Powerful 1100W/230V motor
SDS+ and 13mm keyed chucks
Drilling, Drill+hammer and hammer only (chisel) functions
Supplied in a tough storage case with 3 TCT drill bits and 2 chisels
Weight 5kg


62.00 74.40


Quantity:  



CON1500RDV 1500W SDS+ Rotary Hammer Drill  (Ref: 6479605)

 CON1500RDV 1500W SDS+ Rotary Hammer Drill

This professional rotary hammer drill from Clarke has the necessary power and large chuck capacity to tackle tough drilling and chiselling jobs. This hammer drill is supplied with a carry case and a range of accessories allowing you to deal with the job at hand straight away.
Powerful 1500W, 230V motor with 5.5J impact energy
Drilling, Drilling + Hammer and hammer only (chisel) functions
Variable drilling speed 200-750rpm and impact rate 650-3000 blows/min
Large drilling diameter capacity in wood 40mm, Steel 13mm and concrete 36mm
With 13mm chuck adaptor for use with conventional drill bits
Supplied with depth stop rod and assorted drills and chisels in convenient blow moulded case.
Dimensions (LxWxH): 410mm x 259mm x 144mm - Weight: 6kg (Drill only)


89.00 106.80


Quantity:  



Clarke CON720RHD 5 Function SDS+ Rotary Hammer Dril  (Ref: 6480215)

Clarke CON720RHD 5 Function SDS+ Rotary Hammer Dril

This professional rotary hammer is ideal for drilling and chiselling tough surfaces such as concrete, brick etc. It can be used for DIY and trade applications and includes SDS+ and keyless drill chuck with quick change facility. Supplied with blow moulded case including: 1 x Side Handle, 1 x Depth Stop, 1 x SDS+ Chuck, 1 x Keyless Drill Chuck, 2 x Chisels (1 Flat, 1 Pointed), 8, 10 & 12mm Drill Bits and a Dust Shield.
Rotary hammer provides greater impact than other hammer drills (0-4700 blows per minute)
Five great functions: Drilling (Dual Speed), Drilling & Hammer Action (Single Speed), Hammer Action Only, Forward & Reverse
Mechanical safety clutch
720W Motor
Variable Speed with Forward and Reverse
Dual speed when not used in hammer mode (0-1020 & 0-2300)
Impact Energy: 2.7J, Max drilling capacity wood: 40mm, Max drilling capacity steel: 13mm, Max drilling capacity concrete: 26mm


84.00 100.80


Quantity:  



Clarke Contractor CON1200 Hammer Drill  (Ref: 6479505)

Clarke Contractor CON1200 Hammer Drill

Ideal for general purpose drilling in wood, steel, ceramics etc with heavy duty hammer mode for concrete, stone, masonry and brick drilling. Features lock-on button for continuous drilling and soft grip handle.
1200W, 230V motor
2 speed gearbox (0 – 1000rpm / 0 – 2800rpm), variable speed control & selectable forward / reverse
13mm keyed 3-jaw chuck
Max. drilling capacities (dia.) wood 25mm, steel 13mm & masonry 16mm
Includes side handle with depth stop rod & chuck key
Weight: 3.2kg


42.89 51.47


Quantity:  



Clarke CON400RHD Lightweight 400W SDS+ Rotary Hammer Drill  (Ref: 6479510)

Clarke CON400RHD Lightweight 400W SDS+ Rotary Hammer Drill

This small, compact and super lightweight rotary hammer weighs only 2kg, so it is ideal for prolonged use. Suitable for a wide range of DIY and professional applications when drilling into wood, metal and concrete. Includes 10mm SDS+ and 10mm keyed drill chuck.
High impact (0-6600 blows per minute, impact energy: 1.5J)
Drill and hammer drill function
400W Motor - 230V - 50hz
Mechanical safety clutch - Variable Speed with Forward and Reverse
Max. Drill Capacity: 30mm (Wood), 10mm (Steel) & 10mm (Concrete)
Supplied with 1 x side handle, 1 x depth stop, 1 x SDS+ chuck, 1 x keyed chuck, 6, 8 & 10mm SDS+ drill bits & dust shield
Weight: 2kg


39.00 46.80


Quantity:  



Clarke CON1200RD 1200W SDS+ Hammer Drill  (Ref: 6479600)

Clarke CON1200RD 1200W SDS+ Hammer Drill

Excellent heavy duty drill for drilling stone masonry, concrete and bricks. Using the selectable hammer only mode it makes light work of chiselling through bricks, and block work.
Powerful 1200 Watt, 230V motor
SDS+ and 13mm keyed chucks & comfort grip
Drilling, Drill+hammer and hammer only (chisel) functions
860rpm no load speed - 4050 blows/min impact rate - Impact energy 5.5J
Max drilling capacities (dia.) concrete 32mm, steel 13mm, wood 42mm
Supplied in a tough storage case with 3 TCT drill bits and 2 chisels
Weight 4.7kg


65.00 78.00


Quantity:  



Clarke Tools >  Clarke Power Tools >  Power Drills & Rotary Hammers



CLARKE SPARE PARTS , SERVICE & TECHNICAL HELP - TEL - 0208 9887400



Power Drills & Rotary Hammers - Buy online at Chronos (call us or click LIVE CHAT for help with Power Drills & Rotary Hammers)


Please also visit our new Draper Tools website - selling the whole of the Draper Tools range. You can find it at www.rapid-tools.co.uk. Don't forget to visit the Chronos Engineering Tools Blog and search for Power Drills & Rotary Hammers




Clarke Tooling Homepage
checkout
  View Basket
Free UK Delivery
Tool Sections
Newsletter Sign Up: