Metal Cutters, Shears, Folders & Formers & Bandsaws



Clarke Tools >  Clarke Metalworking >  Metal Cutters, Shears, Folders & Formers & Bandsaws


Clarke CPS150B 150mm Sheet Metal Shears  (Ref: 1700261)

Clarke CPS150B 150mm Sheet Metal Shears

CSP150B makes easy work of cutting sheet metal or bar. The long handles provide the necessary leverage for a clean cut to be made with ease.
Sheet cutting capacity 5mm
Bar cutting capacity Dia 8mm
Dimensions: 290mm x 113mm x 305mm (without handle)
Weight: 12.3kg


64.00 76.80


Quantity:  



Clarke SBR610 3 In 1 Sheet Metal Machine (610mm)  (Ref: 6560005)

Clarke SBR610 3 In 1 Sheet Metal Machine (610mm)

3 in 1 sheet metal machine (610mm). This versatile heavy duty machine can be used to cut, roll and brake (bend) sheet metal.
Bends, slip rolls and shears sheet metal up to 1mm thickness (mild steel)
Min rolling diameter 39mm, Max bending angle 90 Degrees
Bed width 610mm (24")
Segmented press brake tooling for box and pan folding
Hardened and ground reversible shear blades
Front squaring block, Adjustable rear back stops
Dims: 790x866x620mm

CUSTOMERS IN SCOTLAND PLEASE RING 01582 471900 FOR CARRIAGE QUOTE. WE ARE UNABLE TO OFFER FREE DELIVERY TO SCOTLAND ON THIS ITEM.


397.00 476.40


Quantity:  


People who bought this item also bought:
1. Clarke CA24 24lb Anvil (Ref: 7850001)
2. CCH 1000 Manual Chain Block (Ref: 7630460)
3. Clarke CTJ2500QLG 2.5 Tonne Aluminium Garage Jack (Ref: 7621802)


Clarke SBR305 3 In 1 Universal 305mm Sheet Metal Machine  (Ref: 6560000)

Clarke SBR305 3 In 1 Universal 305mm Sheet Metal Machine

3 in 1 universal 305mm sheet metal machine. This versatile heavy duty machine can be used to cut, roll and brake (bend) sheet metal.
Bends, slip rolls and shears sheet metal up to 1mm thickness (mild steel)
Min rolling diameter 39mmMax bending angle 90°
Bed width 305mm (12")
Segmented press brake tooling for box and pan folding
Hardened and ground reversible shear blades, Front squaring block
Adjustable rear back stops
DimS 390x550x390mm, Weight 43kg

CUSTOMERS IN SCOTLAND PLEASE RING 01582 471900 FOR CARRIAGE QUOTE. WE ARE UNABLE TO OFFER FREE DELIVERY TO SCOTLAND ON THIS ITEM.

REMEMBER WHEN COMPARING PRICES - OUR PRICES INCLUDE DELIVERY TO MOST UK MAINLAND POSTCODES


228.00 273.60


Quantity:  



Clarke CBS7MB Metal Cutting Bandsaw  (Ref: 6460122)

Clarke CBS7MB Metal Cutting Bandsaw

Clarke's superb metal cutting bandsaw is engineered specifically for daily use in many engineering plants, fabrication workshops & garages. It boasts a powerful motor & adjustable cutting blade speeds to effortlessly cut through ferrous & non-ferrous metal & alloy tubes, bars & profiles. It also benefits from adjustable, bearing mounted blade guides for accuracy, plus 4 wheels for on-site manoeuvrability.

Powerful 1Hp (750 Watt) 230v motor
Mitre Swivel Vice for accurate mitre cutting from 90° to 45°
Cutting capacities at 90° - 180mm dia. tube & 180x300mm box
Cutting capacities at 45° - 100mm dia. tube & 90x180mm box
4 blade speeds - 34, 41, 59 & 98 M/min.
Oil bath gearbox & precision bearings for long, trouble free service life

CUSTOMERS IN SCOTLAND PLEASE RING 01582 471900 FOR CARRIAGE QUOTE. WE ARE UNABLE TO OFFER FREE DELIVERY TO SCOTLAND ON THIS ITEM.

REMEMBER WHEN COMPARING PRICES - OUR PRICES INCLUDE DELIVERY TO MOST UK MAINLAND POSTCODES

Click here for larger picture of CBS7MB Metal Cutting Bandsaw
1,001.00 1,201.20


Quantity:  



Clarke CPMCS1 Portable Metal Cutting Circular Saw  (Ref: 6462360)

Clarke  CPMCS1 Portable Metal Cutting Circular Saw

Robust metal cutting circular saw - For cutting of iron, steel and other ferrous metals


Filtered recirculated coolant
Includes vice to hold workpiece while cutting
0-45° cutting angle
Includes cutting length guide for repeated cuts.
Max cutting capacity: Round hollow section 65mm, Square hollow section 60mm, Square section 40mm


375.00 450.00


Quantity:  



225mm Metal Cutting Circular Saw Blade for Clarke CPMCS1  (Ref: 6469017)

225mm Metal Cutting Circular Saw Blade for Clarke CPMCS1


39.89 47.87


Quantity:  



CCB1 Compact Bench Mounted Parts Bender  (Ref: 7630073)

CCB1 Compact Bench Mounted Parts Bender

Controlled bending of metal bar and rod up to 180° on the workshop bench to create all manner of shapes, components and structures. The precise radius required is easily obtained by selecting from the different sized dies supplied.

Round dies (mm) 25, 32, 38, 44, 51, 64, 76
Right angle die also included
Bends mild steel bar 8 x 32mm / 7 x 51mm - also round / square rod up to 16mm

Click for larger picture of CCB1 Compact Bench Mounted Parts Bender
79.80 95.76


Quantity:  



CBS45MD (4½" X 6") Metal Cutting Bandsaw  (Ref: 6460060)

CBS45MD (4

A top selling general purpose metal cutting bandsaw which combines sound performance with excellent value for money. Justifies a place in any workshop involved in the cutting of bar, tube and profile.

Cutting capacity - 105mm (4") round, 100 x 150mm (4" x 6") flat at 90°
Quick change horizontal or vertical operating positions with saw table included.
500W, 230v / 1ph motor with combined ON/OFF & safety No-Volt-Release switch.
3 cutting speeds 65/95/165 feet per minute with spring tension arm control & adjustable vice for cutting angles 90 degrees - 45 degrees
Handle & twin wheels for workshop mobility

CUSTOMERS IN SCOTLAND PLEASE RING 01582 471900 FOR CARRIAGE QUOTE. WE ARE UNABLE TO OFFER FREE DELIVERY TO SCOTLAND ON THIS ITEM.

REMEMBER WHEN COMPARING PRICES - OUR PRICES INCLUDE DELIVERY TO MOST UK MAINLAND POSTCODES

Click here for larger picture of CBS45MD (4" X 6") Metal Cutting Bandsaw
258.00 309.60


Quantity:  



CPS200B 200mm Sheet Metal Shears  (Ref: 1700263)

CPS200B 200mm Sheet Metal Shears

CPS200B makes easy work of cutting sheet metal or bar. The long handles provide the necessary leverage for a clean cut to be made with ease.

Sheet cutting capacity 5mm
Bar cutting capacity Dia 10mm
Dimensions: 360mm x 100mm x 335mm (without handle)
Weight: 16.4kg


84.80 101.76


Quantity:  



CMF24 Sheet Metal Folder  (Ref: 7630067)

CMF24 Sheet Metal Folder

A simple device for bending mild steel sheet at various angles, up to 90°. Once mounted into a suitable bench vice, full manual control enables consistently accurate results to be easily obtained. Ideal for general metal fabrication.

Maximum sheet steel capacity 22 swg (0.71 mm)
Max. width Capacity 600 mm
Bench mounted

Click here for larger picture of CMF24 Sheet Metal Folder
49.79 59.75


Quantity:  



CCB2 Compact Floor Mounted Parts Bender  (Ref: 7630074)

CCB2 Compact Floor Mounted Parts Bender

Controlled bending of metal bar and rod up to 180° to create all manner of shapes, components and structures. This floor mounted machine easily achieves the precise radius required by selecting from the different sized dies supplied.

Round dies (mm) 25, 32, 38, 44, 51, 64, 76
Right angle die also included
Bends mild steel bar 8 x 32mm / 7 x 51mm - also round / square rod up to 16mm

Click here for larger picture of CCB2 Compact Floor Mounted Parts Bender
89.80 107.76


Quantity:  



CPS200 Metal Shears  (Ref: 1700260)

CPS200 Metal Shears

A quick and simple way to cut metal sheet and bar. Once bolted to the floor or secured to a baseplate (not provided), the long handle enables good leverage to be applied, resulting in a clean cut with minimum effort.

Sheet cutting capacity 4 mm
Bar cutting capacity 12 mm diameter

Click here for larger picture of CPS200 Metal Shears
89.00 106.80


Quantity:  



CPS75 Mini Sheet Metal Cutter  (Ref: 1700270)

CPS75 Mini Sheet Metal Cutter

A quick and easy way to cut mild steel sheet up to 16 swg (1.6 mm). Once mounted onto a bench or into a vice, the long handle enables controlled movement of the wheel to cut straight, curved and internal corners. Ideal for forming car body parts.

Cutting capacity in mild steel 16 swg (1.6 mm)

Click here for larger picture of CPS75 Mini Sheet Metal Cutter
39.20 47.04


Quantity:  



CPS150 Metal Shears  (Ref: 1700255)

CPS150 Metal Shears

A quick and simple way to cut metal sheet and bar. Once bolted to the floor or secured to a baseplate (not provided), the long handle enables good leverage to be applied, resulting in a clean cut with minimum effort.

Sheet cutting capacity 3 mm
Bar cutting capacity 8mm diameter

Click here for larger picture of CPS150 Metal Shears
78.00 93.60


Quantity:  



DHC-2 Double Headed Metal Nibbler  (Ref: 6500233)

DHC-2 Double Headed Metal Nibbler

Convenient and ideal alternative to the traditional electric or air powered nibbler. Fits to any electric or power drill. Cuts sheet metal into the most intricate shapes and profiles. Two cutting heads to operate from with the handle (supplied) screwing over the head which is not in use for a safer grip.

Maximum cutting capacities: steel plate 1.8mm, stainless steel 1.2mm, copper/aluminium plate 2mm, plastic/fibreboard 2mm
Speed: 1500 3000rpm
Minimum cutting radius: 12mm
Supplied with tool rest, cutter holder, wrench and plastic handle all within a metal storage box
Dimensions (LxWxH) 185 x 113 x 56mm

Click here for larger picture of DHC-2 Double Headed Metal Nibbler
28.50 34.20


Quantity:  



Clarke Tools >  Clarke Metalworking >  Metal Cutters, Shears, Folders & Formers & Bandsaws



CLARKE SPARE PARTS , SERVICE & TECHNICAL HELP - TEL - 0208 9887400



Metal Cutters, Shears, Folders & Formers & Bandsaws - Buy online at Chronos (call us or click LIVE CHAT for help with Metal Cutters, Shears, Folders & Formers & Bandsaws)


Please also visit our new Draper Tools website - selling the whole of the Draper Tools range. You can find it at www.rapid-tools.co.uk. Don't forget to visit the Chronos Engineering Tools Blog and search for Metal Cutters, Shears, Folders & Formers & Bandsaws




Clarke Tooling Homepage
checkout
  View Basket
Free UK Delivery
Tool Sections
Newsletter Sign Up: