Engineering Hand Tools - Measuring Equipment



Clarke Tools >  Clarke Metalworking >  Engineering Hand Tools - Measuring Equipment


CM230 Dial Test Indicator  (Ref: 4500330)

CM230 Dial Test Indicator

A precision 0 - 0.8 mm lever type indicator with low inertia jewelled bearings and tungsten carbide contact point for high sensitivity, repeatability, and accuracy.

Adjustable bezel for zero setting.
Auto reversible contact point adjusts through 240°
Supplied with 6 mm & 8 mm diameter dovetail attachments.
Reads 0-40-0° - in 0.07mm graduations

Click here for larger picture of CM230 Dial Test Indicator
24.50 29.40


Quantity:  



CM200 Micrometer  (Ref: 4500300)

CM200 Micrometer

Accuracy assured with comparative and direct external measurements from 0-1" with graduations of 0.001". A quality product for machine shop and general engineering use.

Micro lapped tungsten carbide tipped anvils.
Hardened steel spindle with ground threads and positive lock lever.
Ratchet stop on thimble for precise and consistent readings.
Superbly finished in enamel and matt chrome.
Supplied in protective case with adjustable spanner.

Click here for larger picture of CM200 Micrometer
9.90 11.88


Quantity:  



CM100 Vernier Caliper  (Ref: 4500200)

CM100 Vernier Caliper

A precision 4 way measuring caliper in high grade stainless steel for values in the range 0-6" (0-150mm) covering internal, external, height and step. Accuracy assured for a broad range of industrial and automotive calculations.

Dual scale calibration in 0.02mm/0.001" units
Locking screw features for batch measurements.
Supplied in strong protective case.

Click here for larger picture of CM100 Vernier Caliper
9.50 11.40


Quantity:  



ET110 Machinists Steel Square (150mm)  (Ref: 1700150)

ET110 Machinists Steel Square (150mm)

An engineers means to accurately check the right angle.

6" blade is hardened, tempered and polished.
Both beam and blade are ground for straightness and parallelism.

Click here for larger picture of ET110 Machinists Steel Square (150mm)
5.30 6.36


Quantity:  



ET135 12" Engineers Rule  (Ref: 1700295)

ET135 12

A standard 300mm Stainless Steel measure for the precision engineer.

Manufactured from stainless steel
Calibrations etched in imperial and metric.

Click here for larger picture of ET135 12" Engineers Rule
2.80 3.36


Quantity:  



ET111 Machinists Steel Sqare (200mm)  (Ref: 1700155)

ET111 Machinists Steel Sqare (200mm)

An engineers means to accurately check the right angle.

8" blade is hardened, tempered and polished.
Both beam & blade are ground to ensure they are both straight & parallel.

Click here for larger picture of ET111 Machinists Steel Sqare (200mm)
8.40 10.08


Quantity:  



CM265 300mm Vernier Caliper Digital  (Ref: 4500365)

CM265 300mm Vernier Caliper Digital

Vernier caliper for accurate measurement of dimensions. Easy-to-read digital display.

Highly engineered precision instrument
Thumb locking wheel
High-grade stainless steel for longevity
Essential tool for machine shop or wood workshop

Click here for larger picture of CM265 300mm Vernier Caliper Digital
32.00 38.40


Quantity:  



ET158 Screw Pitch Gauge (USA 60°)  (Ref: 1700333)

ET158 Screw Pitch Gauge (USA 60)

Engineers tool to accurately measure internal and external thread forms.

31 blades each clearly indexed
Enclosed in a steel case

Click here for larger picture of ET158 Screw Pitch Gauge (USA 60)
3.85 4.62


Quantity:  



ET156 - 3" Feeler Gauge  (Ref: 1700331A)

ET156 - 3

Precision made, dual calibrated measuring blades of fine quality steel - hardened, tempered and polished for long term accuracy.

26 leaves from 0.0015" (0.038mm) to 0.025" (0.635mm)
Locking screws holds one or more blades in position whilst in use.

Click here for larger picture of ET156 - 3" Feeler Gauge
5.70 6.84


Quantity:  



CM130 Locking Vernier Caliper  (Ref: 4500230)

CM130 Locking Vernier Caliper

A precision 4 way measuring caliper in high grade stainless steel for values in the range 0-6" (0-150mm) covering internal, external, height and step. Accuracy assured for a broad range of industrial and automotive calculations.

Dual scale calibration in 0.02mm/0.001" units
Locking screw features for batch measurements.
Supplied in strong protective case.
Spring loaded thumb lock slide adjustment.

Click here for larger picture of CM130 Locking Vernier Caliper
12.90 15.48


Quantity:  



CM180 Micrometer  (Ref: 4500280)

CM180 Micrometer

Accuracy assured with comparative and direct external measurements from 0-25mm with graduations of 0.01mm. A quality product for machine shop and general engineering use.

Micro lapped tungsten carbide tipped anvils.
Hardened steel spindle with ground threads and positive lock lever.
Ratchet stop on thimble for precise and consistent readings.
Superbly finished in enamel and matt chrome.
Supplied in protective case with adjustable spanner.

Click here for larger picture of CM180 Micrometer
9.50 11.40


Quantity:  



ET134 6" Pocket Rule  (Ref: 1700290)

ET134 6

A slim 150mm Stainless Steel measure with clip designed to slip easily into the engineers pocket.

Manufactured from stainless steel
Calibrations etched in imperial and metric.

Click here for larger picture of ET134 6" Pocket Rule
1.95 2.34


Quantity:  



ET152 Steel Machinist Square (300mm)  (Ref: 1700327)

ET152 Steel Machinist Square (300mm)

Precision made from the best quality steel for operators regularly checking to ensure linear and 90°

300mm steel blade hardened & tempered
Ground for straightness & parallelism
Groove on inside corner for clearance.

Click here for larger picture of ET152 Steel Machinist Square (300mm)
19.70 23.64


Quantity:  



CHT621 Measuring Tools Set  (Ref: 1801621)

CHT621 Measuring Tools Set

Set of three measuring tools for trade or DIY use. The folding square measures 45° & 90° angles with metric and imperial markings along one edge. Made of aluminium with pivots which click firmly into position. Can be folded flat after use. The square ruler measure 300 x 500mm made of aluminium with vertical and horizontal vials. The universal adjustable protractor measures 550mm with 0 - 70° angles. Comes with metric markings along one edge. Made from aluminium and supplied with clamp for fixing to material.

Set contains:
600mm (24) Folding square
Square Ruler
Universal Adjustable Protractor

Click here for larger picture of CHT621 Measuring Tools Set
16.80 20.16


Quantity:  



CM250 Measuring Set  (Ref: 4500350)

CM250 Measuring Set

A perfect starter kit for the engineering enthusiast, including the four most commonly used precision measuring / checking devices used in the workshop.

Excellent value for money and no compromise on quality,
External Micrometer 0-25mm with TCT anvils and graduations of 0.01mm.
Locking Vernier caliper 6 " (150mm) 4 way measuring with readings to 0.02mm / 0.001"
Engineers square of knife edge design.
Steel Rule 150mm / 6" with etched graduations on both sides.

Click here for larger picture of CM250 Measuring Set
29.89 35.87


Quantity:  



ET151 Steel Machinist Square (250mm)  (Ref: 1700326)

ET151 Steel Machinist Square (250mm)

Precision made from the best quality steel for operators regularly checking to ensure linear and 90° accuracy

250mm steel blade hardened & tempered
Ground for straightness & parallelism
Groove on inside corner for clearance.

Click here for larger picture of ET151 Steel Machinist Square (250mm)
16.00 19.20


Quantity:  



ET157 Screw Pitch Gauge (Metric 60°)  (Ref: 1700332)

ET157 Screw Pitch Gauge (Metric 60)

Engineers tool to accurately measure internal and external thread forms.

24 blades each clearly indexed
Enclosed in a steel case

Click here for larger picture of ET157 Screw Pitch Gauge (Metric 60)
3.80 4.56


Quantity:  



ET133 3 Piece Spring Caliper Set  (Ref: 1700285)

ET133 3 Piece Spring Caliper Set

A useful set of 3 comparative measures for the precision engineer. Features springs which are hardened and tempered.

150mm Spring Dividers
150mm Outside Spring Calipers
150mm Inside Spring Calipers
Hardened & tempered Springs

Click here for larger picture of ET133 3 Piece Spring Caliper Set
8.80 10.56


Quantity:  



CM150 Dial Caliper  (Ref: 4500250)

CM150 Dial Caliper

A precision 4 way imperial dial caliper in high grade stainless steel for values in the range 0-6" covering internal, external, height and step. Accuracy assured for a broad range of industrial and automotive calculations.

Smooth operating rack and pinion transfers slider movements to dial (Calibrations 0.001")
Dial zero adjustment and lock.
Thumbwheel for fine adjustment.
Locking screw feature for batch measuring.
Supplied in strong protective case.

Click here for larger picture of CM150 Dial Caliper
16.89 20.27


Quantity:  



CM110 Vernier Caliper  (Ref: 4500210)

CM110 Vernier Caliper

A precision 4 way measuring caliper in high grade stainless steel for values in the range 0-8" (0-200mm) covering internal, external, height and step. Accuracy assured for a broad range of industrial and automotive calculations.

Dual scale calibration in 0.02mm/0.001" units
Locking screw features for batch measurements.
Supplied in strong protective case.

Click here for larger picture of CM110 Vernier Caliper
13.90 16.68


Quantity:  



ET128 Depth Gauge With Protractor  (Ref: 1700240)

ET128 Depth Gauge With Protractor

A Stainless Steel measure with etched graduations for the precision engineer to determine depths up to 6" (150mm) and angles through 180 degrees.

Dual calibration - inches/mm
Etched graduations 0° - 180° degrees
150mm rule adjustable throughout its length
Spring tension nut locks rule for accurate depth & angle measurement.

Click here for larger picture of ET128 Depth Gauge With Protractor
8.55 10.26


Quantity:  



CM210 Micrometer  (Ref: 4500310)

CM210 Micrometer

Accuracy assured with comparative and direct external measurements from 1"-2" with graduations of 0.001". A quality product for machine shop and general engineering use.

Micro lapped tungsten carbide tipped anvils.
Hardened steel spindle with ground threads and positive lock lever.
Ratchet stop on thimble for precise and consistent readings.
Superbly finished in enamel and matt chrome.
Supplied in protective case with 1" setting gauge and adjustable spanner.

Click here for larger picture of CM210 Micrometer
11.80 14.16


Quantity:  



ET153 - 3 Piece Spring Caliper Set  (Ref: 1700328)

ET153 - 3 Piece Spring Caliper Set

A trio of popular engineers measuring instruments, precision made from fine quality steel to ensure accuracy.

200mm spring dividers
200mm outside spring calipers
200mm inside spring calipers
Knurled wheels for positive adjustment.

Click here for larger picture of ET153 - 3 Piece Spring Caliper Set
10.80 12.96


Quantity:  



CM190 Micrometer  (Ref: 4500290)

CM190 Micrometer

Accuracy assured with comparative and direct external measurements from 25-50mm with graduations of 0.01mm. A quality product for machine shop and general engineering use.

Micro lapped tungsten carbide tipped anvils.
Hardened steel spindle with ground threads and positive lock lever.
Ratchet stop on thimble for precise and consistent readings.
Superbly finished in enamel and matt chrome.
Supplied in protective case with 25mm setting gauge and adjustable spanner.

Click here for larger picture of CM190 Micrometer
13.30 15.96


Quantity:  



CM160 Dial Caliper  (Ref: 4500260)

CM160 Dial Caliper

A precision 4 way metric dial caliper in high grade stainless steel for values in the range 0-150mm covering internal, external, height and step. Accuracy assured for a broad range of industrial and automotive calculations.

Smooth operating rack and pinion transfers slider movements to dial (Calibrations 0.02mm)
Dial zero adjustment and lock.
Thumbwheel for fine adjustment.
Locking screw feature for batch measuring.
Supplied in strong protective case.

Click here for larger picture of CM160 Dial Caliper
18.89 22.67


Quantity:  



ET109 Machinists Steel Square (100mm)  (Ref: 1700145)

ET109 Machinists Steel Square (100mm)

An engineers means to accurately check the right angle.

4" blade is hardened, tempered and polished.
Both beam and blade are ground for straightness and parallelism.

Click here for larger picture of ET109 Machinists Steel Square (100mm)
4.85 5.82


Quantity:  



CM220 Dial Test Indicator  (Ref: 4500320)

CM220 Dial Test Indicator

A precision 0-10 mm plunger type indicator with adjustable dial and knurled bezel for zero setting.

Large clear dial with integral rev. counter
Built in rear mounting lug.
Reads graduations 0.01 mm over 10 mm travel
Hardened stainless steel rack and sensitive pivot bearings for accuracy.

Click here for larger picture of CM220 Dial Test Indicator
14.50 17.40


Quantity:  



ET160 Wire Gauge  (Ref: 1700335)

ET160 Wire Gauge

For the quick and accurate measurement of a wide range of metal plate, sheet, and wide sizes in either in either imperial or metric dimensions.

Imperial measuring range 1-36 gauge
Metric equivalents shown on reverse side.
Made from hardened steel for long term accuracy.

Click here for larger picture of ET160 Wire Gauge
6.65 7.98


Quantity:  



CM145 Digital Vernier Caliper  (Ref: 4500360)

CM145 Digital Vernier Caliper

A precision 4-way digital measuring caliper, with an easy-to-read LCD, for measuring values between 0 & 6" (0 - 150mm). Internal, external and height dimensions can be easily and accurately measured too, for a broad range of industrial and automotive precision measuring applications.

Dual scale calibration in 0.01mm & 0.0005" units
Locking screw feature for batch measurements
Supplied in a strong plastic case

Click here for larger picture of CM145 Digital Vernier Caliper
16.50 19.80


Quantity:  



CHT625 Combintation Try Square  (Ref: 1801625)

CHT625 Combintation Try Square

Heavy duty versatile tool for measuring and marking. Made from aluminium with a stainless steel rule. Includes inside & outside try square, mitre square & 180° protractor with centre finder of circular objects and depth gauge.

Built-in vertical & horizontal spirit levels and scribe
Etched metric & imperial markings

Click here for larger picture of CHT625 Combintation Try Square
7.80 9.36


Quantity:  



CM170 Combination Square Set  (Ref: 4500270)

CM170 Combination Square Set

square, centre, and protractor heads with (12") stainless steel rule

Measuring heads lock onto the rule for precise square, centreing and angular alignment
Square head sets rule to 90° or 45° to edge, includes spirit level and 45 mm long steel scriber
Centre head locates centres accurately on round sections
Protractor head 0-180° scale (graduated every 1 degree) measures angles to an edge and includes spirit level

Click here for larger picture of CM170 Combination Square Set
29.89 35.87


Quantity:  



CHT614 406mm (16") Combination Square  (Ref: 1801614)

CHT614 406mm (16

High quality aluminium blade with graduated scale (on both sides). Metric and imperial measurements. Black metal base with brass adjusting screw features built in spirit level and scribe.

Click here for larger picture of CHT614 406mm (16") Combination Square
9.50 11.40


Quantity:  



Clarke Tools >  Clarke Metalworking >  Engineering Hand Tools - Measuring Equipment



CLARKE SPARE PARTS , SERVICE & TECHNICAL HELP - TEL - 0208 9887400



Engineering Hand Tools - Measuring Equipment - Buy online at Chronos (call us or click LIVE CHAT for help with Engineering Hand Tools - Measuring Equipment)


Please also visit our new Draper Tools website - selling the whole of the Draper Tools range. You can find it at www.rapid-tools.co.uk. Don't forget to visit the Chronos Engineering Tools Blog and search for Engineering Hand Tools - Measuring Equipment




Clarke Tooling Homepage
checkout
  View Basket
Free UK Delivery
Tool Sections
Newsletter Sign Up: