Dual Purpose and No Gas MIG Welders



Clarke Tools >  Clarke Welders & Welding Accessories >  Dual Purpose and No Gas MIG Welders


Clarke MIG102NG 90amp No Gas MIG Welder  (Ref: 6015600)

Clarke MIG102NG 90amp No Gas MIG Welder

Ideal for automotive and general fabrication this welder does not require a gas cylinder. Flux cored steel welding wire, produces it’s own gas shroud as it burns allowing this machine to weld steel without gas whilst providing optimum performance and reliability. Producing a maximum power of 90amps it welds mild steel up to 4mm thick.

It’s main features include:

Professional type torch with full on/off control (not permanently live)
Multiple power settings for accurate welding power control
Turbo fan cooling for greater efficiency
Thermal overload protection
Extra tough protective casing
Supplied with 1 x welding torch, 2 x 0.9mm torch tips (1 installed in torch) 1 x earth clamp, 1 x two piece welding mask / face shield, 1 x mini spool flux cored wire (0.45kg), 1 x combination wire brush / hammer

Input voltage: 230v~, 50Hz,
Min/ max amperage: 35/90A
Open circuit Voltage: 20-30V
Max input current: 16A
Max welding thickness mild steel): 4mm
Welding wire diameter: 0.9mm
Dims (LWH): 420x192x362mm, Product weight: 16.6kg


119.00 142.80


Quantity:  



Clarke MIG 145 No-Gas MIG Welder  (Ref: 6014505)

Clarke MIG 145 No-Gas MIG Welder

This dual purpose machine offers the advantages of standard MIG welding but without the need for gas bottles. Although it can easily be converted to use conventional shielding gases with the optional accessories which are sold separately.
Power settings from 35 – 135 amps. Welds mild steel 4mm thickness.
Turbo fan cooling for greater efficiency
Uses 0.6 / 0.8mm wire
Fully variable electronic wire speed control
Thermal overload protection
Extra tough protective edging
Operates from 230V power supply.

REMEMBER WHEN COMPARING PRICES - OUR PRICES INCLUDE DELIVERY TO MOST UK MAINLAND POSTCODES


167.00 200.40


Quantity:  



MIG 180 'No-Gas' / 'Gas' MIG Welder  (Ref: 6015182)

MIG 180  'No-Gas'  / 'Gas'  MIG Welder

This dual purpose machine offers the advantages of standard MIG welding but without the need for gas bottles. Although it can easily be converted to use conventional shielding gases.

Easy conversion to gas welding with optional accessories.

All accessories sold

Power settings from 40 – 160 amps. Welds mild steel 5mm thickness.
Turbo fan cooling for greater efficiency.
Uses 0.6 / 0.8mm wire
Fully variable electronic wire speed control
Thermal overload protection.
Extra tough protective edging
Operates from 230V power supply.

REMEMBER WHEN COMPARING PRICES - OUR PRICES INCLUDE DELIVERY TO MOST UK MAINLAND POSTCODES

Click here for larger picture of MIG151EN Turbo 'No-Gas' MIG Welder
193.00 231.60


Quantity:  



Clarke MIG 196 No-Gas/Gas MIG Welder  (Ref: 6015200)

Clarke MIG 196 No-Gas/Gas MIG Welder

This dual purpose machine offers the advantages of standard MIG welding but without the need for gas bottles. Although it can easily be converted to use conventional shielding gases.

Easy conversion to gas welding with optional accessories.

All accessories sold

Power settings from 40 – 180 amps. Welds mild steel 5-6mm thickness.
Turbo fan cooling for greater efficiency
Uses 0.6 / 0.8 / 1mm wire.
Fully variable electronic wire speed control.
Thermal overload protection.
Extra tough protective edging
Operates from 230V power supply.
Related Ite

Click here for larger picture of MIG151EN Turbo 'No-Gas' MIG Welder
218.00 261.60


Quantity:  



Gas Regulator/Converter  (Ref: 8132000)

Gas Regulator/Converter

Converts a No Gas Mig Welder for use with gas bottle.


16.95 20.34


Quantity:  



Flux cored mild steel welding wire 0.9mm  (Ref: 8132110)

Flux cored mild steel welding wire 0.9mm


8.99 10.79


Quantity:  



0.6mm mild steel welding wire  (Ref: 8132100)

 0.6mm mild steel welding wire


5.99 7.19


Quantity:  



0.8mm mild steel welding wire  (Ref: 8132070.)

0.8mm mild steel welding wire


5.49 6.59


Quantity:  



Stainless Steel 0.8mm (mini spool) Welding Wire  (Ref: 8132090)

Stainless Steel 0.8mm (mini spool) Welding Wire


14.99 17.99


Quantity:  



0.6mm tip  (Ref: 8132020)

  0.6mm tip


2.59 3.11


Quantity:  



0.8mm tips  (Ref: 8132030)

0.8mm tips


2.59 3.11


Quantity:  



CO2 Gas Cylinder (600g)  (Ref: 6000643)

 CO2 Gas Cylinder (600g)


16.95 20.34


Quantity:  



CO2/Argon Mix Welding Gas  (Ref: 6000660)

CO2/Argon Mix Welding Gas


11.99 14.39


Quantity:  



Argon Gas Cylinder (110 Bar)  (Ref: 6000663)

Argon Gas Cylinder (110 Bar)

110 Bar
For Aluminium/Stainless Steel welding


16.95 20.34


Quantity:  



CO2 / Argon Mix Gas Cylinder (110 Bar)  (Ref: 6000662)

CO2 / Argon Mix Gas Cylinder (110 Bar)

110 Bar
For Thin Sheet Metal/Mild Steel/Stainless Steel welding


13.89 16.67


Quantity:  



Clarke MIG160EN Turbo 'No-Gas' MIG Welder  (Ref: 6014560)

Clarke MIG160EN Turbo 'No-Gas' MIG Welder

This powerful 150 amp dual purpose machine offers the advantages of standard MIG welding but without the need for gas bottles. It can easily be converted to use conventional shielding gases but is supplied with a special flux-coated wire that produces it's own gas shroud as it burns. This feature allows the machine to weld without gas, simplifying its use and making it ideal for outside use since there is less chance of breeze blowing away the shrouding effect of the gas. Ideal for automotive and light agricultural fabrication work.

Multiple power settings from 30 - 150 amps. Welds mild steel to 6mm maximum thickness.
Turbo fan cooling for improved duty cycle.
Uses 0.6 / 0.9mm wire, up to 5kg spools.
Fully variable electronic wire speed control.
Thermal overload protection with auto reset. Unit operates from 230v, 1ph power supply (15 amps minimum).
Everything required to start No-Gas welding is included. Flux coated mild steel wire, professional style torch & hose, earth clamp & face mask.
Easy conversion to Gas welding with optional accessories. Full details & instructions are supplied.

Click here for larger picture of MIG160EN Turbo 'No-Gas' MIG Welder
272.00 326.40


Quantity:  



MIG151EN Turbo 'No-Gas' MIG Welder  (Ref: 6014100)

MIG151EN Turbo 'No-Gas' MIG Welder

This powerful 150 amp dual purpose machine offers the advantages of standard MIG welding but without the need for gas bottles. It can easily be converted to use conventional shielding gases but is supplied with a special flux-coated wire that produces it's own gas shroud as it burns. This feature simplifys its use and makes it ideal for outside working since there is less chance of any breeze blowing away the shrouding effect of the gas. Particularly suited to automotive and light agricultural use.

Power settings from 30 - 150amps. Welds mild steel up to 6mm. Also accepts aluminium & stainless steel wire.
Turbo fan cooling for improved duty cycle.
Uses 0.6 / 0.8 / 0.9mm wire up to 5Kg spool.
Fully variable electronic wire speed control.
Thermal overload protection with auto reset. Unit operates from 230v, 1ph power supply (30 amps minimum).
Everything needed to start 'NO GAS' welding is included - flux coated mild steel wire, professional style torch assembly, earth clamps & face shield.
Easily converts to 'GAS' MIG welding with optional accessories. Full instructions supplied.

Click here for larger picture of MIG151EN Turbo 'No-Gas' MIG Welder
218.00 261.60


Quantity:  



MIG130EN Turbo 'No-Gas' MIG Welder  (Ref: 6014530)

MIG130EN Turbo 'No-Gas' MIG Welder

This dual purpose machine offers the advantages of standard MIG welding but without the need for gas bottles. Although it can easily be converted to use conventional shielding gases, it is supplied with a special flux-coated wire that produces it's own gas shroud as it burns. This feature simplifys its use and makes it more suitable for outside use since there is less chance of any breeze blowing away the shrouding effect of the gas.

Power settings from 30 - 130 amps. Welds mild steel to 5mm maximum thickness.
Turbo fan cooling for improved duty cycle.
Uses 0.6 / 0.9mm wire, up to 5kg spools.
Fully variable electronic wire speed control.
Thermal overload protection with auto-reset. Unit operates from 230v, 1ph power supply.
Everything required to start No-Gas welding is included. Flux coated mild steel wire, professional style torch & hose, earth clamp & face mask.
Easy conversion to Gas welding with optional accessories. Full details & instructions are supplied.

Click here for larger picture of MIG130EN Turbo 'No-Gas' MIG Welder
233.00 279.60


Quantity:  



MIG110EN Turbo 'No-Gas' MIG Welder  (Ref: 6014500)

MIG110EN Turbo 'No-Gas' MIG Welder

This dual purpose machine offers the advantages of standard MIG welding but without the need for gas bottles. Although it can easily be converted to use conventional shielding gases, it is supplied with a special flux-coated wire that produces it's own gas shroud as it burns. This feature simplifys its use and makes it more suitable for outside use since there is less chance of any breeze blowing away the shrouding effect of the gas.

Power settings from 30 - 100 amps. Welds mild steel to 5mm maximum thickness.
Turbo fan cooling for improved duty cycle.
Uses 0.6 / 0.9mm wire, up to 5kg spools.
Fully variable electronic wire speed control.
Thermal overload protection with auto-reset. Unit operates from 230v, 13amp domestic power supply.
Everything required to start No-Gas welding is included. Flux coated mild steel wire, professional style torch & hose, earth clamp & face mask.
Easy conversion to `Gas` welding with optional accessories. Full details & instructions are supplied.

Click here for larger picture of MIG110EN Turbo 'No-Gas' MIG Welder
189.00 226.80


Quantity:  



MIG105EN Turbo 'No-Gas' MIG Welder  (Ref: 6014010)

MIG105EN Turbo 'No-Gas' MIG Welder

This dual purpose machine offers the advantages of standard MIG welding but without the need for gas bottles. Although it can easily be converted to use conventional shielding gases, it is supplied with a special flux-coated wire that produces it's own gas shroud as it burns. This feature simplifys its use and makes it more suitable for outside use since there is less chance of any breeze blowing away the shrouding effect of the gas.

Power settings from 30 - 100amps. Welds mild steel up to 4mm thickness.
Turbo fan cooling for improved duty cycle.
Uses 0.6 / 0.9mm wire up to 5Kg spools.
Fully variable electronic wire speed control.
Thermal overload protection with auto reset. Unit operates from 230v, 13amp domestic power supply.
Everything required to start `No Gas` welding is included, flux coated wire, professional style torch assembly, earth clamp & face shield.
Converts easily to a conventional `Gas` MIG Welder with optional accessories. Full instructions supplied.

Click here for larger picture of MIG105EN Turbo 'No-Gas' MIG Welder
193.90 232.68


Quantity:  



MIG100EN Turbo 'No-Gas' MIG Welder  (Ref: 6010103)

MIG100EN Turbo 'No-Gas' MIG Welder

This dual purpose machine offers the advantages of standard MIG welding but without the need for gas bottles. Although it can easily be converted to use conventional shielding gases, it is supplied with a special flux-coated wire that produces it's own gas shroud as it burns. This feature simplifys its use and makes it more suitable for outside use since there is less chance of the breeze blowing away the shrouding effect of the gas.

Power settings from 30 - 100amps. Welds mild steel up to 5mm thickness. Also accepts stainless steel & aluminium wire.
Turbo fan cooling for improved duty cycle.
Uses 0.6 / 0.9mm wire up to 5Kg spools.
Fully variable electronic wire speed control.
Thermal overload protection with auto reset. Unit operates from 230v, 13amp domestic power supply.
Everything required to start `NO GAS` welding is included, flux coated wire, professional style torch assembly, earth clamp & face shield.
Converts easily to `GAS` MIG Welder with optional accessories. Full instructions supplied.

Click here for larger pictures of MIG100EN Turbo 'No-Gas' MIG Welder
195.00 234.00


Quantity:  



MIG 90EN 'No-Gas' MIG Welder  (Ref: 6010107)

MIG 90EN 'No-Gas' MIG Welder

This dual purpose machine offers the advantages of standard MIG welding but without the need for gas bottles. Although it can easily be converted to use conventional shielding gases, it is supplied with a special flux-coated wire that produces it's own gas shroud as it burns. This feature simplifys its use and makes it more suitable for outside use since there is less chance of the breeze blowing away the shrouding effect of the gas.

Power settings from 24 - 90amps. Welds mild steel up to 4mm thickness.
Ventilated cooling to maintain duty cycle.
Uses 0.6 / 0.9mm wire up to 5Kg spools.
Fully variable electronic wire speed control.
Thermal overload protection with auto reset. Unit operates from 230v, 13amp domestic power supply.
Everything needed for `NO GAS` welding is included - flux coated mild steel wire, professional style torch assembly, earth clamps & face shield.
Easily converts to `GAS` MIG welding with optional accessories. Full instructions supplied.

Click here for larger picture of MIG 90EN 'No-Gas' MIG Welder
178.90 214.68


Quantity:  



Clarke Tools >  Clarke Welders & Welding Accessories >  Dual Purpose and No Gas MIG Welders



CLARKE SPARE PARTS , SERVICE & TECHNICAL HELP - TEL - 0208 9887400



Dual Purpose and No Gas MIG Welders - Buy online at Chronos (call us or click LIVE CHAT for help with Dual Purpose and No Gas MIG Welders)


Please also visit our new Draper Tools website - selling the whole of the Draper Tools range. You can find it at www.rapid-tools.co.uk. Don't forget to visit the Chronos Engineering Tools Blog and search for Dual Purpose and No Gas MIG Welders




Clarke Tooling Homepage
checkout
  View Basket
Free UK Delivery
Tool Sections
Newsletter Sign Up: